Grandstream Device Configuration

Grandstream Device Configuration

STATUS

BASIC SETTINGS

ADVANCED SETTINGS

FXS PORT

FXO PORT

Admin Password:

(purposely not displayed for security protection)

Layer 3 QoS:

(Diff-Serv or Precedence value)

Layer 2 QoS:

802.1Q/VLAN Tag 802.1p priority value (0-7)
802.1p priority value (NATed traffic) (0-7)

STUN Server:

(URI or IP:port)

Keep-alive Interval:

(in seconds, default 20 seconds)

Use STUN to detect network connectivity:

No
Yes, total STUN response misses to restart DHCP client(mininum=3)

Firmware Upgrade and Provisioning:

Upgrade Via TFTP HTTP HTTPS
Firmware Server Path:
Config Server Path:

XML Config File Password:
HTTP/HTTPS User Name:
HTTP/HTTPS Password:

Firmware File Prefix: Firmware File Postfix:
Config File Prefix: Config File Postfix:

Allow DHCP Option 66 to override server:
No Yes

Automatic Upgrade:
No Yes, every minutes(60-5256000).
Yes, daily at hour (0-23). Yes, weekly on day (0-6).

Always Check for New Firmware at Boot up
Check New Firmware only when F/W pre/suffix changes
Always Skip the Firmware Check

Disable SIP NOTIFY Authentication:

No Yes (Device will not challenge NOTIFY with 401 when set to Yes)

Authenticate Conf File:

No Yes (cfg file would be authenticated before acceptance if set to Yes)

Firmware Key:

(in Hexadecimal Representation)

SIP TLS Certificate:

SIP TLS Private Key:

SIP TLS Private Key Password:

ACS URL:

ACS Username:

ACS Password:

Periodic Inform Enable:

No Yes

Periodic Inform Interval:

Conncetion Request Username:

Connection Request Password:

Connection Request Port:

CPE SSL Certificate:

CPE SSL Private Key:

System Ring Cadence:

(Syntax: c=on1/off1-on2/off2-on3/off3;)

Call Progress Tones:

Dial Tone:
Ringback Tone:
Busy Tone:
Reorder Tone:
Confirmation Tone:
Call Waiting Tone:
Prompt Tone:

(Syntax: f1=freq@vol[,f2=freq@vol[,c=on1/off1[-on2/off2[-on3/off3]]]]);
(Note: freq: 0 - 4000Hz; vol: -30 - 0dBm; Cadence on and off are in milliseconds)

Prompt Tone Access Code:

(Key pattern to get Prompt Tone. Maximum 20 digits. No default.)

Lock Keypad Update:

No Yes (configuration update via keypad is disabled if set to Yes)

Disable Voice Prompt:

No Yes (voice prompt is disabled if set to Yes)

Disable Direct IP Call:

No Yes (direct IP call is disabled if set to Yes)

Life Line Mode:

Auto Always Disconnected Always Connected

NTP Server:

(URI or IP address)

NTP Update Interval:

minutes( 5-1440 )

Syslog Server:

Syslog Level:

Send SIP Log:

No Yes

Download Device Configuration: